CARPRO Clearcut is an extremely fast acting liquid abrasive built from the ground up for efficiency, performance, and speed! Unlike other popular compounds on the market Clearcut doesn't fool you by swelling the paint or hiding water spots and scratches just to see them re-surface later! With NO fillers Clearcut wipes off fully and a simple Eraser wipe down EASILY removes any lubricants. Unlike compounds of the past, CARPRO Clearcut has its own method of application for optimal results... reversing the traditional "heavy to light" method, we start with lighter pressure and finish heavy! Additionally I find myself using a bit more compound with Clearcut than I do with traditional compounds. While Clearcut cuts like a Ginsu, it is also low dusting and wipes off with ease! Say goodbye to hours of wasted time and hello to efficiency and less labor costs!  

• CARPRO ClearCut provides exceptional cut in very little time whilst creating a minuscule amount of dust.
• While its cutting capabilities are extraordinary, the finish can also surprise you. With the capability of removing scratches as deep as P1000 CARPRO ClearCut is the perfect tool for a 2-step job on any paint or even 1-step on many med-to-hard paintworks.
• Extremely fast cut no wax, fillers, or silicone, body shop safe.

How to use:

1. Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea sized drops of ClearCut.
2. Spread product across a section.
3. Raise speed to MED/HIGH.
4. Use MIN pressure for first 2-3 passes and increase with each pass.
5. When scratches disappear or the polish becomes clear, wipe clean with a MF towel.
6. Clean pad.
7. Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.

For rotary:

1. Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea sized drops of ClearCut.
2. Spread product across a section.
3. Keep polisher on LOW speed with LOW pressure.
4. Use MIN pressure for first 1-2 passes increasing pressure ever so slightly. Work with max 1000-1200 RPM.
5. When scratches disappear or the polish becomes clear, wipe clean with a MF towel.
6. Clean pad.
7. Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.